Skip to content

Steering Wheel

From version 2.0.0 onwards, the Tuner software Simucube supports wireless steering wheels through Simucube Link Hub.

Getting started

Connect a new wheel

  1. Press Add device button

  1. Select Wireless wheel from list
  2. Turn on the wheel

Manage Connections menu

Open Manage Connections menu

  1. Select Steering Wheel from the device list in overview or in left side panel
  2. In top left corner press "hamburger" menu which will open the list of option and press Manage Connections button

Disconnect a wheel

  1. From the wheel config menu press Disconnect button
  2. Turn off the wheel

Forget a connected wheel

  1. From the wheel config menu press Forget button on the row of the wheel you want to forget

Configure menu

Open Configure menu

  1. Select Steering Wheel from the device list in overview or in left side panel
  2. In top left corner press "hamburger" menu which will open the list of option and press Configure Wheel button

Calibrate analog paddles

  • Follow the instructions on the screen and adjust the maximum and minimum values of the analog paddles so that in the end the resting position the output is 0% and when the paddle is fully pressed the output is 100%

Change analog paddles function

  • Select the desired function for each analog paddle from the drop-down menu

Bite point adjustment

  • Use the slider labeled Adjust Bite Point to adjust the bite point
    • this will adjust max value of the secondary axis.
    • Test the bite point by pressing the analog paddles